Sheet Metal Fabricator FTI

2nd Shift
3:30 pm- 2:00 am
Monday- Friday 

SUMMARY

An entry-level position in a production environment with no prior experience required. In this area you’ll form sheet metal into cylindrical and conical products, prep and fabricate stainless steel pipe and fittings for welding.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties and related work may be assigned as necessary.
 

Under close supervision you’ll be introduced to a series of duties and responsibilities with increasing complexity to include, but are not limited to the following:

• Set up work area, select and verify the materials for production, and meet daily production and quality demands in such specific areas as: grinding, rolling, seam welding, flanging, tagging; shearing.
• Comply with health, safety (including OSHA), and environmental procedures, and ensures the cleanliness of the area.
• Work in a team environment.
• Continue to learn and expand one’s own capacity within this job by increasing knowledge and skill base.
• Perform various other assignments per lead person or supervisor direction.

POSITION REQUIREMENTS

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential duties.

• Strong mechanical ability
• Knowledge of sheet metal layout (proper fittings), surface grinding and metallurgy.
• Forklift experience.
• Demonstrated commitment to quality and safety
• Positive attitude and team-oriented
• Willingness to learn the more complex aspects of the equipment operation involved within the round area and shear area.
• Willingness to work in other areas as needed
• History of dependability
• Ability to thrive in a fast-paced environment with shifting priorities.

Knowledge, Skills and Experience

• Ability to read and understand work instructions, technical documents (cut sheets), safety policies, company policies and procedures.
• Ability to complete written documentation. Ability to effectively communicate with co-workers and superiors.
• Ability to apply basic math skills including adding and subtracting whole numbers and fractions.
• Ability to accurately read a tape measure to 1/32”.

Personal Attributes

• Independent
• Dependable; determined, positive in demeanor
• Attention to detail
• Team player
• Good attitude

Physical Demands 

• Frequent standing, sitting, and use of hands in this support role is required
• Specific vision abilities required to include close vision, and ability to adjust focus
• Occasionally perform physical activities including lifting (up to 50 lbs. unassisted)

Work Environment
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The noise level in the production area is usually moderately loud. The Fabrication department is a sectioned off area of the production floor. Various grinding, forming and welding tasks are performed within the Fabrication department. 

• Safety glasses and hearing protection are required when in the production area
• PPE covering eyes and skin is required when welding
• PPE covering hands and face is required when grinding
• PPE specific for certain tasks performed is required
• Reinforced toed boots required